(1)Display format:128×64 dots, 1/64 duty, 1/9 bias.

(2)Construction:LCD panel , COG and FPC, White LED Back-light.

(3)Display type:STN, Negative, 12 o’clock view

(4)Controller:ST7565 or Equivalent

(5)Extended temperature type.

(6)Add a Cover-layer to improve the FPC strength.

(1)Dot size:0.485(W) × 0.485(H)mm.

(2)Dot pitch:0.5(W) × 0.5(H)mm.

(3)Viewing area:66.8(W) × 35.5(H)mm.

(4)Module size:89.7(W) × 111.7(H) × 6.0 max (T)mm

(1)/CS1:Chip Select Signal.

(2)/RES:Reset Signal.

(3)A0:H:D0~D7 are Display Data L:D0~D7 are Instruction.

(4)/WR:Write Signal.

(5)/RD:Read Signal.

(6-13)D0-D7:Data Bus Line.

(14)VDD:Power Supply for logic.

(15)GND:Power Supply(GND).

(16)VOUT:DC/DC Voltage Converter Output.

(17)CAP3-:Capacitor pad for internal DC/DC voltage converter.

(18)CAP1+:Capacitor pad for internal DC/DC voltage converter.

(19)CAP1-:Capacitor pad for internal DC/DC voltage converter.

(20)CAP2-:Capacitor pad for internal DC/DC voltage converter.

(21)CAP2+:Capacitor pad for internal DC/DC voltage converter.

(22-26)V1-V5:LCD driver supplies voltages.

(27)VR:Voltage Adjustment Pin.

(28)C86:Interface Mode Select Signal.

(29)P/S:Parallel/Serial Data Select Signal.

(30)IRS:IRS="H"use the internal resistors IRS="L"Do not use the internal resistors.